Xxion™ by ConneXxions - An extensive range of Quality Cables and Connectors at substantially less than High Street Prices. Xxion products are available in a range of specifications, Value, Pro, Professional and Premium to match your application needs.
BT Plug to 3 x BT Sockets, the ideal way to connect any three Phones, Faxes, Modems, Answer Phones etc., to a single BT Socket.
We also stock these Adaptors in money saving multipacks and alternative specifications; please search Amazon for Xxion Value Multipack for full details.
Price : £2.49
10 m phone cable is ideal for phone, fax, modem or sky box extension
Price : £3.99
This BT phone cable Tripler Adapter can be used to connect three standard BT phone cable devices into one socket. For example, 2 x telephones and a fax machine into a single wall socket
Price : £1.08
Turn up the heat and let nothing get in your way! The Sennheiser/adidas PMX 680 neckband headphones are not only lightweight and sturdy, they also stay extremely secure in your ear while you run or work out in the gym. Sound-wise, their high-output drivers deliver a powerful and energizing stereo sound. These headphones have been designed and tested for heavy movement. Their strain relief parts are made of highly-flexible, shock-absorbing material while the cable is Dupont Kevlar reinforced, offering you unmatched strength and durability. Even under the toughest of conditions, e.g. -10 degree celsius, the PMX 680 Sports have been found to function well and maintain their flexibility.
Price : £29.99
Extend your telephone cable with ease, BT Style plug to socket.
Price : £4.90
Pro Signal Twin / Double Telephone Extension Lead - BT Plug to Twin BT Sockets, allows two devices to share a single socket.
Price : £3.49
A faceplate filter/splitter of the type installed by the BT engineer for an installed ADSL service.
IMPROVES BROADBAND SPEED AND RELIABILITY* (*although not guaranteed to be any different)
It replaces the lower half of the BT NTE5a or NTE5b master socket and provides two outlets on the faceplate, one is an RJ11 socket (wired "straight through", unfiltered) for the connection of ADSL modems, the other is a BT 431A socket which is filtered for the connection of telephony equipment.
A 3-way IDC connector on the rear also provides a filtered output to any extension sockets (new 6 way are also available).
This unit is ideal if you have one computer within reasonable distance of the master socket, if all the other sockets are for telephony use you don't need microfilters at each outlet.
DO NOT PUT ADDITIONAL FILTERS ON EXTENSIONS
* Tested by BT to SIN issue 2.2
* Compatible with caller display (doesn't strip out the caller ID information)
* CE marked - BS EN55022
* Moulded from VO rated material colour matched to BT 1P white
* Dimensions (HxWxD): 68x84x30mm (excluding protruding connector plug)
Note: The NTE5 master socket is the type that when the lower half is un-plugged, it isolates the BT network side from the subscriber.
Any ADSL modems connected to the filtered output, either via the socket on the front or connected into hardwired extension sockets wired from the rear, will not function from these filtered outputs.
Some faceplates are branded BT, some are plain - all are made in the same factory
Does not include NTE5a socket pictured
Price : £12.20
These units are fitted inside customer premises (by BT, Telephone System Installers and Builders on new build homes) and offer a demarcation point between network and customer wiring.
The NTE5a can be surface mounted using the back box provided or flush mounted in any standard single gang back box.
Cable entry points are provided in the top, bottom and sides. Knock-outs in the rear of the back box give additional flexibility in cable/wiring entry and exit.
- made From Fire redardent ABS
- 601 sockets to BS6312 and BT's D2902
- PCB Composite epoxy (CEM1) - 1.6mm thick
- Mastering Components:
* Ring Capacitor - 1.8μF
* Resistor 470Ω
* Arrestor 26A
* Dimensions - 86mm x 86mm x 36mm
* Screw terminals - two heavy duty screw terminals suitable for large diameter drop wire
* Clamp plate is nickel undercoat overplated with tin
* Surface mounted using the backbox provided or flush mounted in any standard single gang (BS3662 size UA1) wallbox
* Knock-outs in the rear of the backbox give additional flexibility in cable/wiring entry and exit
NTE5A is designed to terminate networks using heavy drop wire which is connected to two heavy duty terminals. Two part unit comprising terminal screw electroplated nickel to BS3382 part 3&4. The clamp plate is nickel undercoat (2.5 microns) overplated with tin (7.5 microns). The NTE5a is fitted inside customer premises and provides a demarcation point between network and consumer wiring. Several BT manufacturing plants, sockets vary minimally as pictures shown above. Motif mainly on external front panel, or inside front network panel. Exclusively packaged by DTL, barcode: EAN: 5060192431452. Legal to be installed on PBX telephone systems, builders approved to network connection pass, and telephone network providers (front split half can also be installed legally by any individual consumer). IDC Tool is required to add extensions to front panel, search for: B003TQ9ZUI or 5060192431469
Price : £9.99
